Skip to content

KayuhBMX
BMX Shop
Facebook
Ramp Master
Twenty Inch Cup
About

Japan

Home>
Blog>
Japan

Japan BMX. By Carhartt

Post Author:iwan
Post published:January 13, 2011
Post Category:Uncategorized
Post Comments:4 Comments

Carhatt BMX Japan

Continue Reading Japan BMX. By Carhartt

Links

Instagram #kayuhbmx

thecurbkl

BMX boutique 🇲🇾
Tuesday-Sunday 1pm-9pm
Friday 2.30pm-9pm
Closed on Monday
Whatsapp : 0126841441
#thecurbkl

The Sureshot frame from @bsdforever is utilising

The Sureshot frame from @bsdforever is utilising a low BB, longer rear end, mellower head angle and removable brake lugs, the Sureshot is designed and built with speed and trails in mind. BSD used a new heat treated invest cast seatstay bridge on the Sureshot frame which offers a stronger and stiffer rear end. They also used an invest cast seatclamp brazed onto the frame so there's no need for a separate clamp. Also the slot cut beneath the seatclamp gives more clamping power less torque on the bolt. RM1700 (SOLD OUT)

@colonybmxbrand Fantastic Pedal is a super lightwe

@colonybmxbrand Fantastic Pedal is a super lightweight pedals made from polycarbonate with a knurled body and 12 molded pins per side for superior traction RM100

The @bsdforever Leezus bar is Liam Zingberg’s ne

The @bsdforever Leezus bar is Liam Zingberg’s new signature handlebar. It became apparent that Leezy and the other guys who use Zing bars always cut the width down, so it seemed like we should just offer them at 28.5” wide instead. Rise: 9.25″
Width: 28.5″
Up Sweep: 2°
Backsweep: 11°
Weight: 1.7lbs
Colours: Flat Black & Flat Raw RM360

Spline drive BMX Sprocket from @demolitionparts to

Spline drive BMX Sprocket from @demolitionparts to fit 19mm 48spindles only. The Mugatu sprocket is machined from 4.5mm thick heat treated Crmo as opposed to the usual aluminium so should last you a very long time. Weight: 119g
Available in 25t only. RM210

The Swerve hub from @bsdforever has an ultra fast

The Swerve hub from @bsdforever has an ultra fast engagement made possible by it’s 150 tooth ratchet ring plus individually toothed pawls, the pedal gap on this hub is almost non-existent and the noise it creates is a loud buzz. The Swerve hub is perfect for tech moves where a small pedal gap really helps. The Swerve hub uses many of the same parts as the Back Street Pro hub, such as bombproof 14mm female bolts, chromoly cones, a massive female axle and super tought 6903 bearings. RM950

New for 2021, the latest version of @bsdforever Da

New for 2021, the latest version of @bsdforever Dan Paley's signature Soulja frame, updated using the new Superscoop chainstay tubing for extra tire clearance when your wheel is slammed. This frame features a 75.2 degree headangle, 8.8” standover, 12.8 – 13.2” rear end and invest cast dropouts with built in chain tensioners. RM1700

The @aresbikes “A-Class Kevlar” BMX Tire (fold

The @aresbikes “A-Class Kevlar” BMX Tire (foldable) is a high pressure BMX flatland tire and has been developed in collaboration with Hiroya Morizaki. The Ares Bikes “A-Class Kevlar” BMX Tire (foldable) is “Made in Japan” and can handle pressure up to 125psi (8.6 Bar). It offers excellent rolling characteristics and due to its rubber compound it provides solid grip and durability. It is also very light and foldable by the use of Kevlar instead of wire. With these features, it fits in any backpack and is perfect as a spare tire on the go. Size 1.75 & 1.9 RM250

@pr1mobmx Remix is a lightweight aluminium shell r

@pr1mobmx Remix is a lightweight aluminium shell runs on 3 sealed bearings while the cassette spins on 2 cartridge bearings and 1 needle bearing to ensure smooth reliable use. Features:
Available in 36h only
Hollow 14mm male axle
Comes with an 9t driver.
Weight: 471g RM650

The @strangerco Crux Cranks are a great value set

The @strangerco Crux Cranks are a great value set of 2PC cranks. They feature a 19mm axle and use the 48 spline system which is the basis of most aftermarket cranks. Available in 175mm length. Comes with Primo 19mm Mid Bottom Bracket. -Crank Arm Length: 175mm
-Drive side: RHD & LHD Compatible
-Axle Size: 19mm
-Colour: Black
-Weight: 760gram RM600

The @kinkbmx Hulk bars are big, just like the name

The @kinkbmx Hulk bars are big, just like the name implies. Constructed from 13-butted chromoly tubing that's post-weld heat-treated for the perfect blend of strength to weight and features geometry best suited for taller, "Hulk like" riders. Rise: 10"
Width: 30"
Backsweep: 12°
Upsweep: 1°
Crossbar Height: 7.375"
Crossbar Width: 11.5"
Weight: 828gram RM300 (SOLD OUT)

Load More... Follow on Instagram

Recent Posts

Vans Slip-On Pro Dakota Roche review by Kayuhbmx
Vans Offers WaffleCup Tech in a Slip-On for the First Time Ever with the Slip-On BMX by Dakota Roche
CSR Project for Kuantan BMX Scene
Trip to Ragas Extreme Centre
Vans X Cult wear test
Kuantan Extreme 2020
Perlis OSBMX Gathering
One Day Before CMCO
Vans Partners With CULT On New Head-to-Toe Collection, Led by The Versa Hoodie
Neeta Belajar Main BMX

Archives

Archives

© 2020 KayuhBMX